How to Generate Electricity from Sea Water Simple Experimental Project

,

ads
Just like wind and sun, sea is another example of massiveness and a potential raw energy source that may be harnessed for acquiring electrical power. Yes, just as solar or wind power, sea surfs can also be effectively dimensioned and converted for generating electricity. How? We’ll learn in this article through one simple experimental set up.

Probably there would be hardly anybody who might not have visited the sea shore. We all have enjoyed the sea water and its exciting waves and the surfs. And definitely we all know and experienced the power of this natural attribution.
Sea surfs are powerful and nevertheless are consistently happening and will be available almost forever. These rise and ebbs of the sea water has quite attracted the researcher and have compelled them to think seriously about ways of converting this useful force of nature to the benefit of the mankind.
I being a great admirer of nature truly appreciate this approach by the many researchers and strongly believe that indeed sea water is one of the important sources that can be harnessed for generating electricity that would light up not only homes but cities.
A very simple experimental set up is discussed her, that would interest and enlighten the readers regarding how to generate electricity from sea water through pretty ordinary means and installations.


Referring to the figure below we see that the set up is especially intended for exploiting the rise and the fall of the sea water ebbs or rather the giant waves and the surfs.
During the rising stance of the wave, we may notice a significant increase in the level of the sea water for the relevant section of the water.
This instantaneous increase in the level of the sea reduces to minimal levels when the water ebbs out or when the waves crashes down to repeat the cycle afresh.
This ongoing process if trapped inside an enclosed area effectively simulates a pumping or piston like action. In other words, the above operation of the sea water generates a powerful push pull effect of the air column inside the enclosed area.
The concept can be easily understood be referring to the figure.
Now, the above explained push pull effect of the air inside the shown barrel or the pipe like structure when introduced across a propeller, makes it spin in a to and fro motion corresponding to the gushing and retrieving air content inside the column.
The diagram shows, how the above propeller may be integrated to an alternator spindle for instantly converting the rotation into pure usable electricity.
However one small drawback makes the whole set up a bit complicated. Since the fluctuations of the sea water is not constant and may vary drastically depending upon the climatic conditions, the generated electricity will also vary abruptly and generate electricity at non standard rates, dangerous for the many sophisticated appliance sin our homes.
Therefore the set up would require additional stabilizing equipment and stages for making the generated electricity compatible and safe with our domestic appliances.
However, set up can be safely and easily used for charging batteries by adding a straightforward electronic circuit stage.
As shown in the figure, the circuit is nothing but an ordinary voltage regulator circuit, employing the popular 78XX IC.
The generated unstable electricity is first rectified by the bridge configuration and filtered appropriately by the filter capacitor. This filtered DC is fed to the input of the voltage regulator IC, which does the rest by controlling and keeping the voltage under check and safe for charging the connected battery.
The battery is charged safely, once it gets fully charged, it may be used for operating an inverter.
Safe and absolutely Free electricity that may be used just for ever.



ads2